8 Tips to Make Your Powder Coating Wheels Look Great

It is not unknown to the world that a set of wheels can make and even break a car. A badly finished wheel or intense wear and tear can really ruin the overall appearance of a vehicle - regardless of it being a car or a truck. Sandblasting and Powder Coating is the best options to resort to in this case. Sandblasting is a process that involves propelling a stream of abrasive materials against a surface under high pressure to make a rough surface, a smooth one. Powder coating provides a high specification coating that gives a finish which is tougher, durable as well as abrasion resistant.

If you want to opt for Powder Coating Wheels, hiring a professional to do the job will provide a completely new look of your wheels as a decorative finish will be sprayed on like a conventional paint. Though, the below-mentioned tips will be all the more helpful to make your wheels look great.

1. Preparation is Key - Powder coating requires a dry and clean surface for the best results. Hence, ensure that your wheels are clean and dry. Opt for sandblasting in this case.

2. Pre-Bake Wheels - It is natural that your wheels may be subjected to some of the harshest conditions on your vehicle. Release the contaminants stuck on your wheel by heating and baking it.

3. Good Ground Connection - It is important to ground your wheels to the powder coating gun. The static charge that is created by doing so helps the powder to cling into every crevice.

4. High-Temperature Masking Tape - Use this masking tape to have a high tolerance causing issues while refitting the wheels. You can use this to mask off portions of the wheels to apply the second coat of powder.

5. Clear Coat Powder Application -Use your choice of clear powder while Powder Coating Wheels to clean dust and road grime off easily. This will also give you a deep and wet look finish of the wheels.

6.  Inside Wheels Protection -Powder coating helps seal the metal while keeping your wheels from corroding. Apply a layer of powder on the inside barrels of the wheels to protect them from corrosion.

7. Metal or High-Temperature Filler to be Used - If your wheel has some curbing or damage, use an all-metal filler to fill and sand imperfections smoothly.

8. Quality Powder Gun - Powder coating wheels can be difficult with all the crevices that you need to coat.  Not all coating guns are created equal so you need to be sure that during powder coating; use the gun that has the ability to do the needful.

If you are planning to opt for the services of Sandblasting and Powder Coating, look no further than Yardmark Powder Coating. We provide the service for all types of surfaces. If you want to inquire more about our services, drop in or simply reach out to us at 03 9457 5333!

Top Benefits of Wheel Powder Coating

Wheel rims are the one which makes or break the look of your car. While buying custom rims is not affordable for a lot of car owners, refinishing your rims by investing in the Wheel Powder Coating in Melbourne.

It is the process in which the ground particles made of pigment and resin are electrically charged and sprayed onto a metal surface such as your wheel rims. After that the electrostatic charge allows these particles to support the metal surface. The rims are baked and allow the particles to blend together and cure. Overall, the end result is a durable, quality surface coat and finish looks amazing.

However, there are many other reasons to select the powder coat your wheel rims, here is what we think are the top benefits:-

• Higher resistance

Wheels rims are the ones which go through a lot of action. So, chipping and corrosion can be caused by exposure to outdoor elements. Powder coated steel wheel creates a non-porous surface protection and provides more resistant than traditional liquid paints.

• Environment-friendly

Wheel rims can be redone by yourself, but to keep the environment safe, opt for using powder coating over liquid paints. This is because using powder coating over liquid paints is better for the environment and using liquid paints causes harmful to the ozone layer as it contains volatile organic compounds. And on the other hand powder coating doesn’t contain dangerous VOCs and also you can recycle any excess powder.

• Better coverage

If you want better coverage as compared to liquid paints, then wheel powder coating in Melbourne is the renowned option. For some difficult designed wheel rims, it becomes difficult to reach liquid paints to every facet of the rim. However, with powder coating, even the most difficult-to-reach parts of the rim get the perfect coverage applying electrostatic method combined with the curing process.

• Cost-effective

In the long run, Powder Coating Steel will save you money. However, it has been observed that traditional painting methods can be less expensive, but when you consider the durability and longevity of powder coating then, eventually the cost of it is low.

Overall, knowing the essential benefits of powder coating of wheel rims if you are looking for the best provider of powder coating to get your wheel refurbished, then Yardmark Powder Coating is the ultimate choice. Contact at 03 9457 5333 and prevent corrosion on steel or other materials.

Why You Need To Opt For Powder Coating Your Wheel Rims?

If you’re looking forward to achieving a stylish look for your car, don’t forget wheel rims. They can truly make all the difference when it comes to style and flare. Not all of us can afford custom rims, but fortunately, Powder Coating Rims can create a great style statement.

All You Need To Know About Powder Coating in Melbourne?

Powder coating is a method of grinding up particles of resin and pigment and electrically charging them before spraying them through an electrically charged gun onto a variety of materials, including rims. Due to its electrostatic charge, the coating firmly sticks to your rim surface. Later, the rims will be backed for one smooth, long-lasting coat.

Reasons You Need To Choose Powder Coating Rims Instead Of Something Else

With a wide range of options available in the market, you might be wondering why you need to choose powder coating. Below listed are the four reasons why this green technology is the best things for your wheel rims.

• Quality

Painting your rims can give a nice look for a short-term but it won’t give the same coverage as the professional service of powder coating in Melbourne, Additionally, it can be really tough to get paint into decorative rims with lots of design complexity. There is no such issue with powder coat, as it can easily be sprayed and securely adhere in place through electrostatic process.

• Environmentally-friendly

Unlike liquid paint, you can avoid all sort of harmful compounds with powder coating. These compounds are not only bad for ozone layer but for the people who happen to inhale them. After completion of powder coating, those extra particles can even be recycled.

• Stronger resistance and durability

Your wheels been in the constant touch with the road, they take the impact of potentially destructive environments including sand and other road debris. Where regular paint might chip and flake, powder coating rims can withstand it, thanks to its non-porous covering design.

• Save Money

You might be willing to go for a cheaper option, like liquid paint. But, the powder coating will look better than other methods. This means, you can actually save money in the long run. This leads you enjoy the rims for a longer period without the need for the touch-ups or repainting.

If you’re willing to have a professional Powder Coating in Melbourne for your rims, give Yadmark Power Coating a call today!